EX-DEMO Open WI.DE Frameset Size Large Turquoise.
The frame has been previously built up and used as a demo bike for our customers to go and try. The frame therefore has some signs of use, including a couple of cosmetic chips in the frame (please see photos). The frame is on display at our Harrogate store (Post code: HG1 2BF). It will make an awsome custom build project for someone. If you have any questions please call our Harrogate team on 01423 568 222.
Frame Spec:
BB standard
BB386EVO pressfit 86.5x46mm BB shell
Recommended groupsets
The WI.DE. is dedicated 1x(or 2x with Classified hub). For serious gravel and off-road(on any brand of bike),we recommend a rear derailleur with a clutch or cage damper:any Shimano GRX,any SRAM AXS,any older SRAM 1x mechanical,Campagnolo Ekar)
Shimano crank fit
All road cranks
SRAM crank fit
All DUB road, Force 1 BB30
Front derailleur mount
none, 1x drivetrain standard, 2x only with Classified hub
Recommended ring shape
Flat (for example Wolftooth)
Maximum 1x ring size
General guidance: 46t (flat ring, not available in all sizes with all BCDs so check with your crank supplier), 42t (SRAM offset ring). Note: clearance depends on chainline & chainring. 2mm space is required so please verify.
Minimum 1x ring size
In standard set-up: 38t (flat & offset rings). Smaller rings can work depending on cassette/rear derailleur/chain length setup
Front thru-axle
100x12mm superlight Carbon-Ti X-12
Front disc rotor size
160mm only
Front brake caliper mount
Smartmount 160 system attaches flatmount caliper, without adaptor, for 160mm rotors
Rear thru-axle
142x12mm superlight Carbon-Ti X-12
Rear disc rotor size
160mm only
Rear brake caliper mount
Smartmount 160 system attaches flatmount caliper, without adaptor, for 160mm rotors
MultiStop internal system
Mechanical 1x, Di2, eTap
Seatpost
27.2mm diameter, standard set-up zero-offset
Cage mounts
Seattube, downtube, under-downtube, under-BB